Large-flux reverse osmosis membrane elements are characterized by large effluent fluxes, a salt rejection rate of over 96%, and a high recovery rate. Their stable and reliable performance can be met in public places such as municipal drinking water improvement and school hospitals where water consumption is relatively high. .
Membrane element and its main parameters
膜元件型號
脫鹽率 (%)
透水量 (GPD)
測試條件
壓力 （MPA）
測試液濃度（PPM）
回收率（%）
TW-1812-90G
96
90
60
250
35
TW-2012-130G
96
130
60
250
35
TW-2012(50%)
96
180
60
250
55
Test temperature: 25°C; test solution PH 7.5
Related Information
The average difference between the minimum water production rate and the standard value of a single membrane element listed in the above table does not exceed 15%;
Each membrane element is strictly inspected before leaving the factory and packed in a vacuum bag for storage. In order to prevent microorganisms from being produced during storage and transportation, it is recommended to soak the membrane with RO membrane protection solution before use.
Before the membrane element is used normally, the membrane element must be allowed to run for 1 hour. The water produced in this 1 hour should not be used.
Precautions:
When using, please determine the safety and suitability of the product according to its use.
The contents of the sample will be modified according to the actual product design without notice.
Yangzhou Sanyang Science and Technology Co., Ltd. is a new technology enterprise that mainly engages in production, production and R&D of RO reverse osmosis membrane filter c
Chinese 
English 
關(guān)閉返回
